Technical elements & sections
Standard modules dimensions:
450mm; 900mm; 1000 mm, 1200 mm
Space between modules:
The basic concept for the DIVIDO partition wall system is modularity, simplicity, economy and reduced effort for installation. For this reason, each phase has been studied since the design phase to find the best solution to achieve an easy installation.
The system allows users to customize their office space to a large extent. To this end, the panels offer great freedom in choosing their size and allow you to combine various elements to obtain special partitions in terms of design and quality finishes. These qualities of the system are obtained due to the high quality and excellent performance of the frames, of the fixing system and also of the elements the system is made of.
The system is based on a combination of standard type elements such as the supporting frame and fixing elements, and combining them with a non-standard type of wooden panels, glass panels, doors and furniture elements to meet each specific requirements of our clients.
The main frame structure is made of steel profiles processed by plastic deformation, bending, rolling and welding.
The profiles are made of galvanized steel.
The wall is of a sandwich type and consists of panels fixed together with hooks. The space between the two panes is filled with mineral wool.
The panels are attached to the main frame system with hooks made of galvanized steel.
Panels in use: CHIPBOARD: 18/19 mm thick, Class E1/B2 or VENEERED CHIPBOARD 19 mm.
Maximum height: 3000 mm
Maximum width: 1200 mm.
GASCKETS AND HOOKS
For a better fixing and control, we use rubber gaskets or a combination of rubber and plastics (coextruded gaskets). The rubber gaskets insulate the connections between floor and ceiling, panels and mullions, and between panels and transoms.
Special galvanized steel hooks are used to fix the panels on the structure. The hooks are attached to the back of chipboard with special screws. After fixing the hooks to the back panels, they are ready to be hung from the supporting structure made of the main frame system.
Easy to install and dismantle Easy access for repairs and additions to the system.
All structure and main frames pillars are perforated and large perforations have been made at a pitch of 256 mm to allow hooks fixing and the passage of electrical cable channels. Cable perforations are of 26x50mm to allow passage of electrical wiring and other installations.
Rooms and industrial space
Training rooms and spaces for education
© All rights reserved.
Promo zone: TechoPartitions,partition wall, glass partitions, room dividers, office partition wall, Romania, Buchares,partition wall, glass partitions, room dividers, space dividers, office partition wall, system DIVIDO, DUO, SKY, VITRUM, MODULO. Bucharest, Romania.,partition wall, glass partitions, room dividers, space dividers, office partition wall, system DIVIDO, DUO, SKY, VITRUM, MODULO,glass,office,secure glass,toilet partitions,doors,door,GEZE,DORMA,METALGLAS,bumper,alu frame, partition wall romania,partition wall bucharest,mures,glass mure,gypsum board,gypsum wall