Technical elements & sections
Standard modules dimensions:
450mm; 900mm; 1000 mm, 1200 mm
Space between modules:
The basic concept for the DIVIDO partition wall system is modularity, simplicity, economy and reduced effort for installation. For this reason, each phase has been studied since the design phase to find the best solution to achieve an easy installation.
The system allows users to customize their office space to a large extent. To this end, the panels offer great freedom in choosing their size and allow you to combine various elements to obtain special partitions in terms of design and quality finishes. These qualities of the system are obtained due to the high quality and excellent performance of the frames, of the fixing system and also of the elements the system is made of.
The system is based on a combination of standard type elements such as the supporting frame and fixing elements, and combining them with a non-standard type of wooden panels, glass panels, doors and furniture elements to meet each specific requirements of our clients.
The Divido Twinglass partitions can be fitted with blinds mounted in between the glass sheets. The blinds are fitted with a control system mounted on the outside of the metal profile.
The partition wall system is made of glass panels mounted inside aluminum frames. The aluminum frames are fixed to the main frame structure.
The aluminum profile is 37.5 mm (face visible) wide and 18 mm thick.
The wall is 100 mm thick.
The main frame structure is made of steel profiles processed by plastic deformation, bending, rolling and welding.
The profiles are made of galvanized steel.
PANELS WITH GLASS
The panels are made of aluminum profiles which make up a frame with glass sheets inside.
The glass is clear, tempered. The visible part of the profile is of 37.5 mm.
The panels are attached to the main frame system with hooks made of galvanized steel.
Glass thickness: 6-9 mm.
Maximum height: 3000 mm
Maximum width: 1200 mm.
Full height glass partitions;
Modules arranged vertically or horizontally;
Over head glass modules mounted on the top of the doors.
GASCKETS AND HOOKS
For a better fixing and control, we use rubber gaskets or a combination of rubber and plastics (coextruded gaskets).
The rubber gaskets insulate the connections between floor and ceiling, panels and mullions, and between panels and transoms.
SHELVING SYSTEMS AND CABINETS
The shelves and cabinets that are mounted in a removable wall are
ideal for your office space. In this range of partitions the hanging system of the shelves and cupboards is hidden, along its full height, inside the space between modules.
Thus the shelves and cabinets can be adjusted according to each client’s specific requirements. The pitch at which they can change their position is 32 mm and its position may be changed from floor to ceiling.
Easy to install and dismantle Easy access for repairs and additions to the system.
All structure and main frames pillars are perforated and large perforations have been made at a pitch of 256 mm to allow hooks fixing and the passage of electrical cable channels. Cable perforations are of 26x50mm to allow passage of electrical wiring and other installations.
Rooms and industrial space
Training rooms and educational facilities
© All rights reserved.
Promo zone: TechoPartitions,partition wall, glass partitions, room dividers, office partition wall, Romania, Buchares,partition wall, glass partitions, room dividers, space dividers, office partition wall, system DIVIDO, DUO, SKY, VITRUM, MODULO. Bucharest, Romania.,partition wall, glass partitions, room dividers, space dividers, office partition wall, system DIVIDO, DUO, SKY, VITRUM, MODULO,glass,office,secure glass,toilet partitions,doors,door,GEZE,DORMA,METALGLAS,bumper,alu frame, partition wall romania,partition wall bucharest,mures,glass mure,gypsum board,gypsum wall